|
| |
DESCRIPTION OF PRODUCT MATERIALS
PLEASE NOTE THAT "DISTRESSED WOOD" IS WOOD THAT LOOKS
OLD AND USED. THIS IS THE WAY IT IS SUPPOSED TO LOOK.
Alabastrite
Alabastrite is a name for polyresin
items. Alabastrite is a stone-based material which can be intricately molded
producing great detail, and will allow paint to adhere. These items may be
cleaned by dusting, however, they should not be washed with water as they are
painted with water soluble paints.
Bone China
White clay with bone ash added. Bone ash
content must be at least 25% by U. S. guidelines. Fired at 1800 degrees. The
translucent material is finished with a glaze or underglaze (matte). Lighter,
stronger, more expensive than porcelain.
Porcelain
Fine ground white clay, molded and fired
in an oven for eight hours at 1200 degrees. Finished with a glazed, underglazed,
or "bisque" finish. Glazing produces a high gloss; underglaze produces a matte
finish. Bisque is a matte finish without glaze. After finishing, the item is
"cooked" for six hours at 800 degrees.
Jade Porcelain
Jade porcelain is a type of porcelain
made with a finer clay. Usually no glaze or only a colorless glaze will be
applied at the final firing to show off the very smooth surface and to preserve
the translucency. Jade Porcelain is used for night lights because of its high
degree of translucency when lit.
Stoneware
White clay with fine ground stone.
Working with stoneware demands great expertise, and is in fact becoming a lost
art. Stoneware is safe to use in microwave and conventional ovens.
Patchwork Items
Unique fabric or paper prints are
applied to the surface of porcelain, dolomite or polyresin items. After
application, 12 layers of lacquer are added and the item is hand polished to a
high gloss between each layer.
Cubic Zircon
The most successful simulated diamond.
Properties such as refraction, hardness, and specific gravity are remarkably
similar to diamonds. Cubic zirconia are very hard to distinguish from diamonds;
sometimes a jewelers loop will be needed to see the difference.
Diamond
Extremely hard, highly refractive
colorless or white crystalline of carbon. Diamonds, like all gemstones, are
judged in terms of Carats, or weight (different from Karats, as in gold purity).
Gold
The ultimate precious metal. Virtually
indestructible, amazingly malleable, doesn't rust or tarnish. Graded by purity;
in the U.S. a scale of 24 is used, so 24 Karats (24K) is 100% pure. 18K is 18
parts gold and 6 parts alloy (other metals), and so on. 10K is the legal minimum
for Karat-graded gold. The word "Plumb" indicates the exact purity of the piece.
Gemstones
Rubies, sapphires, emeralds and
amethysts, often treasured as birthstones, fall under the category of gemstones.
Gemstones are priced and graded by Carat weight.
Pearl
A smooth, lustrous, variously-colored
deposit formed around a grain of sand in the shell of a certain mollusk. Pearls
may be formed naturally or "cultured" through an artificial implanting process.
Sterling Silver
To qualify as "sterling" a given piece
must be composed of a least 92.5% pure silver.
Hong Tze
To closely emulate a special stone found
in China which is known for its deep red color, these items are created using an
alabastrite polyresin. Hong Tze pieces are highly polished, further bringing out
the intense, deep red color.
Frosted Acrylic
Acrylic items are given the French Lilac
process, (used on glass), to achieve the distinctive frosted look. The drama of
frosted glass without the weight.
Gypsum
Gypsum is a white mineral which is
usually used to make Plaster of Paris.
Dolomite
A magnesia-rich, sedimentary rock
resembling limestone, dolomite is either gray, pink or white in color.
|
